Whirlpool Duet Control Lock

April 20, 2024 Post a Comment

Whirlpool duet control lock

And it says control loft it's the duet we wrap low. And hold for three seconds that's right there

How do I turn off the control lock on my Whirlpool washer?

If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.

Why is my Whirlpool washer stuck on control lock?

The most common cause of a Whirlpool washer door being locked and not being able to open is a faulty lid switch (including the striker). The door switch locks and unlocks your door depending on which stage your wash cycle is at. When it becomes defective, your washer door may not unlock when it's supposed to.

Where is the control lock button on a Whirlpool Duet?

Before you can unlock your washer, you need to make sure it's plugged in first. After the washer has started, look for the button that indicates “Control Lock”. It is usually located on the panel at the top of the washer.

How do I get my washer out of Control Lock?

How do you reset the Control Lock on a Duet washer?

How to Unlock the Controls for a Whirlpool Duet Washer

Locate the "Control Lock/Unlock" button on your Duet's control panel. Video of the Day.
Press and hold the "Control Lock/Unlock" button for three seconds.
Release the "Control Lock/Unlock" button when the control lock icon on the display disappears.

How do you reset the control lock on a Whirlpool Duet dryer?

The Easy Fix

Locate the “End of Cycle Signal” button. This is located on the right side of the Duet model dryer.
Push the button and hold it down for 3 seconds.
The Control Lock LED should turn off letting you know that your dryer is no longer locked.

How do I unlock the keys on my Whirlpool washer?

Hey everyone uh in this video i'm going to show you how to fix a whirlpool zen washing. Machine that

How do you manually unlock a Whirlpool front load washer?

How to Manually Open the Door

Turn off and unplug the washer/dryer.
Close the water faucet.
Wait until the drum has stopped rotating – never open the door while the drum is in motion.
Wait until water and laundry have cooled down when washing with high temperatures.

How do I reset my Whirlpool front loader door lock?

It by taking the top off. And you can see that white thing in there a round thing at the top reach

Why is my washer locked and won't turn on?

The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.

How do I get my dishwasher out of control lock?

The control lock light will be illuminated if a key is pressed on the control the control lock light

How do I turn off the control lock on my Whirlpool oven?

To turn the control lock setting off, press and hold the START button for 3 seconds. If this doesn't work, turn the oven off at the circuit breaker for 1 minute. When the circuit breaker is turned back on, the error code should be gone.

How do I turn off the control lock on my dryer?

Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.

Why is my Whirlpool washer door lock flashing?

The Lid Lock Light will flash if Lid Lock has not moved into the Lock Position, the Lock Motor can not be powered, or the Lid is not closed completely due to interference. Some models will lock immediately, while others will not lock until after the wash cycle has started.

What does it mean when a dryer Says Control Lock?

Some models offer a control lock feature. You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle. Children cannot accidentally start the dryer by touching buttons with this option selected.

Why does my dryer have a lock symbol?

To prevent children from accidentally starting or playing around with the washer or dryer, the Child Lock feature disables the buttons on the control panel (with some exceptions, like the Power button).

How do you manually unlock a front load washer?

Open a manual lock by unplugging the machine and waiting 5 minutes. Use some fishing line to unlock the door if it still won't open. Unplug a machine with an electronic lock and wait 5-10 minutes to see if it unlocks. Pull on the plastic tab in the panel of a front-loading machine if the electronic lock is still stuck.

Why is my washer door locked?

If the door or lid won't open at the end of the cycle, then the lock mechanism may be at fault. Most washers will have a manual release to unlock the mechanism and allow you to open the door or lid. The release is normally accessible from below the door lock, or on some models, from inside the soap dispenser housing.

How do I reset my front load washer?

How to reset the washing machine:

Press POWER to turn the washer off.
Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
With the power disabled, press and hold the START/PAUSE button for 5 seconds.
Plug the washer back in, or turn the circuit breaker back on.